Ten checks that cost the most to miss
Circle one for each check: 0 Fine, 1 Ask, 2 Fix first, 3 Walk away.
Title and VIN. The seller’s name is on the title. The VIN on the title matches the VIN plate on the unit.
Roof sealant. Look along every sealant line at the vents, AC and skylights. Cracked, lifted or missing sealant gets a mark. If you cannot get up safely, look from a ladder and from inside.
Ceiling and corners. Look inside for stains, bubbles or color changes, especially in the front corners and around vents.
Smell. Close the unit up for five minutes, then breathe in. A damp or musty smell means ask more questions.
Floors. Walk every foot of the floor, slowly. Soft, spongy or sagging spots near slide-outs, doors, the bathroom and the kitchen sink get a mark.
Slide-outs. Run each one all the way out and all the way in. Listen for grinding, look at the seals, and check that the floor inside is solid.
Tires. Find the date code on every tire, spare included. The last four digits are the week and year it was made. Look for cracks in the sidewalls.
Water. Run the pump and open every tap. Look under each sink and around the pump and water heater for drips or stains.
Propane. Ask when the system was last leak-checked. Look at hoses for cracks. If you smell gas, stop and leave it to a propane shop.
Power. Run the unit on shore power and test every outlet and the AC. If it has a generator, run it under load and write down the hours.
Not a professional inspection. It does not estimate repair costs and gives no safety guarantee. Take your own photos and get a certified RV inspector or a mechanic to look at anything that worries you. RigWalk is made by Quietlathe LLC.